Publikacje

Publikacje 2020Publikacje 2019 Publikacje 2018 Publikacje 2017 Publikacje 2016 Publikacje 2015 Publikacje 2014 Publikacje 2013

The influence of austenitization temperature on phase transformations of supercooled austenite in low-alloy steels with high resistance to abrasion wear

B. Białobrzeska, R. Dziurka, A. Żak, P. Bała
Archives of Civil and Mechanical Engineering 18, 413 (2018)
tekst: https://doi.org/10.1016/j.acme.2017.09.004

Structure and properties of U alloys with selected d-metals and their hydrides

S. Sowa, N.-T.H. Kim-Ngan, M. Krupska, M. Paukov, V. Buturlim, L. Havela, M. Chrobak, Z. Tarnawski
Physica B 536, 546 (2018)
tekst: http://dx.doi.org/10.1016/j.physb.2017.09.116
erratum: https://doi.org/10.1016/j.physb.2019.07.035

A three-dimensional numerical assessment of heterogeneity impact on a solid oxide fuel cell’s anode performance

T. A. Prokop,  K. Berent,  J. S. Szmyd, G. Brus
Catalysts 8, 503 (2018)
tekst: https://doi.org/10.3390/catal8110503

Mapping of local lattice parameter ratios by projective Kikuchi pattern matching

A. Winkelmann, G. Nolze, G. Cios, T. Tokarski
Physical Review Materials 2, 123803 (2018)
tekst: https://doi.org/10.1103/PhysRevMaterials.2.123803

Surface investigation of chemically delithiatied FePO4 as a cathode material for sodium ion batteries

K. Walczak, A. Kulka, B. Gędziorowski, M. Gajewska, J. Molenda
Solid State Ionics 319, 186-193 (2018)
tekst: https://doi.org/10.1016/j.ssi.2018.01.041

Fabrication of Functional Carbon/Magnetic Nanocomposites as a Promising Model of Utilization of Used Crosslinked Polymers

R. Alosmanov, J. Imanova, K. Wolski, R. Ziemmermann, S. Fiejdasz, J. Przewoźnik, K. Goc, C. Kapusta, S. Zapotoczny, M. Szuwarzyński
Materials 11(12), 2595 (2018)
tekst: https://doi.org/10.3390/ma11122595

Electronic sensitization of CuO thin films by Cr-doping for enhanced gas sensor response at low detection limit

A. Szkudlarek, K. Kollbek, S. Klejna, and A. Rydosz
Mater. Res. Express 5, 126406 (2018)
tekst: https://doi.org/10.1088/2053-1591/aae0d8

A Hybrid System for Magnetic Hyperthermia and Drug Delivery: SPION Functionalized by Curcumin Conjugate

D. Lachowicz, A. Kaczyńska, R. Wirecka, A. Kmita, W. Szczerba, A. Bodzoń-Kułakowska, M. Sikora, A. Karewicz, S. Zapotoczny
Materials 11(12), 2388 (2018)
tekst: https://doi.org/10.3390/ma11122388

Supported lipid bilayers with encapsulated quantum dots (QDs) via liposome fusion: Effect of QD size on bilayer formation and structure

M. Wlodek,  M. Kolasińska-Sojka,  M. Szuwarzyński,  S. Kereïche,  L. Kováčik,  L. Zhou,  L. Islas,  P. Warszyński, W. H. Briscoe
Nanoscale 10, 17965 (2018)
tekst: https://doi.org/10.1039/C8NR05877F

Label-free Infrared Spectroscopy and Imaging of Single Phospholipid Bilayers with Nanoscale Resolution

A. Cernescu, M. Szuwarzyński, U. Kwolek, P. Wydro, M. Kepczynski, S. Zapotoczny, M. Nowakowska, L. Quaroni
Analytical Chemistry 90, 10179–10186 (2018)
tekst: https://doi.org/10.1021/acs.analchem.8b00485

Tuning of elasticity and surface properties of hydrogel cell culture substrates by simple chemical approach

S. Fiejdasz, W. Horak, J. Lewandowska-Łańcucka, M. Szuwarzyński, J. Salwiński, M. Nowakowska
Journal of Colloid and Interface Science 524, 102 (2018)
tekst: https://doi.org/10.1016/j.jcis.2018.04.004

Hybrid Materials Based on L,D-Poly(lactic acid) and Single-Walled Carbon Nanotubes as Flexible Substrate for Organic Devices

P. Fryń, K. A. Bogdanowicz, N. Górska, J. Rysz, P. Krysiak, M. M. Marzec, M. Marzec, A. Iwan, A. Januszko
Polymers 10, 1271 (2018)
tekst: http://dx.doi.org/10.3390/polym10111271

AA6013 aluminium alloy deformed by forward-backward rotating die (KoBo): Microstructure and mechanical properties control by changing the die oscillation frequency

P. Koprowski, M. Bieda, S. Boczkal, A. Jarzębska, P. Ostachowski, J. Kawałko, T. Czeppe, W. Maziarz, M. Łagoda, K. Sztwiertnia
Journal of Materials Processing Technology 253, 34–42 (2018)
tekst: http://dx.doi.org/10.1016/j.jmatprotec.2017.10.043

Achieving room temperature superplasticity in the Zn-0.5Cu alloy processed via equal channel angular pressing

W. Bednarczyk, J. Kawałko, M. Wątroba, P. Bała
Materials Science and Engineering A 723, 126–133 (2018)
tekst: http://dx.doi.org/10.1016/j.msea.2018.03.052

Effect of zirconium microaddition on the microstructure and mechanical properties of Zn-Zr alloys

M. Wątroba, W. Bednarczyk, J. Kawałko, P. Bała
Materials Characterization 142, 187–194 (2018)
tekst: http://dx.doi.org/10.1016/j.matchar.2018.05.055

Microstructure of titanium on complex deformation paths: Comparison of ECAP, KOBO and HE techniques

J. Kawałko, M. Wroński, M. Bieda, K. Sztwiertnia, K. Wierzbanowski, D. Wojtas, M. Łagoda, P. Ostachowski, W. Pachla, M. Kulczyk
Materials Characterization 141, 19–31 (2018)
tekst: http://dx.doi.org/10.1016/j.matchar.2018.04.037

Triiodide Organic Salts: Photoelectrochemistry at the Border between Insulators and Semiconductors

E. Wlaźlak, J. Kalinowska-Tłuścik, W. Nitek, S. Klejna, K. Mech, W. Macyk, and K. Szaciłowski
ChemElectroChem 5, 3486 (2018)
tekst: https://doi.org/10.1002/celc.201800975

Realistic estimates of superconducting properties for the cuprates: reciprocal-space diagrammatic expansion combined with variational approach

M. Fidrysiak, M. Zegrodnik, and J. Spałek
J. Phys.: Condens. Matter 30, 475602 (2018)
tekst: https://doi.org/10.1088/1361-648X/aae6fb

Incorporation of charge- and pair-density-wave states into the one-band model of d-wave superconductivity

M. Zegrodnik and J. Spałek
Phys. Rev. B 98, 155144 (2018)
tekst: https://doi.org/10.1103/PhysRevB.98.155144

Heavy pnictogen chalcohalides: the synthesis, structure and properties of these rediscovered semiconductors

E Wlaźlak, A. Blachecki, M. Bisztyga-Szklarz, S. Klejna, T. Mazur, K. Mech, K. Pilarczyk, D. Przyczyna, M. Suchecki, P. Zawal, and K. Szaciłowski
Chem. Commun. 54,12133 (2018)
tekst: https://doi.org/10.1039/c8cc05149f

Spin–Orbit Interaction and Induced Superconductivity in a One-Dimensional Hole Gas

F. K. de Vries, J. Shen, R.J. Skolasinski, M. P. Nowak, D. Varjas, L. Wang, M. Wimmer, J. Ridderbos, F. A. Zwanenburg, A. Li, S. Koelling, M. A. Verheijen, E. P. A. M. Bakkers, L. P. Kouwenhoven
Nano Lett., 18, 6483–6488 (2018)
tekst: https://doi.org/10.1021/acs.nanolett.8b02981

Effect of low Zn doping on the Verwey transition in magnetite single crystals: Mössbauer spectroscopy and x-ray diffraction

V. Chlan, J. Żukrowski, A. Bosak, Z. Kąkol, A. Kozłowski, Z. Tarnawski, R. Rezniček, H. Štepánková, P. Novák, I. Biało, and J. M. Honig
Phys. Rev. B 98, 125138 (2018)
tekst: https://doi.org/10.1103/PhysRevB.98.125138

Protein adsorption mechanisms at rough surfaces: Serum albumin at a gold substrate

Zbigniew Adamczyk, Agata Pomorska, Małgorzata Nattich-Rak, Magdalena Wytrwal-Sarna, Andrzej Bernasik
Journal of Colloid and Interface Science 530, 631-641 (2018)
tekst: https://doi.org/10.1016/j.jcis.2018.06.063

Design and characterization of silicone micromaterials: A systematic study

J. Lewandowska-Łańcucka, M. Staszewska, M. Szuwarzyński, S. Zapotoczny, M. Kepczynski, Z. Olejniczak, B. Sulikowski, M. Nowakowska
Materials and Design 146, 57–68 (2018)
tekst: https://doi.org/10.1016/j.matdes.2018.03.010

Magnetic nanocomposites based on phosphorus-containing polymers – structural characterization and thermal analysis

Rasim Alosmanov, Michał Szuwarzyński, Juergen Schnelle-Kreis, Georg Matuschek, Abel Magerramov, Abdulsaid Azizov, Ralf Zimmermann, Szczepan Zapotoczny
Nanotechnology 29 (13), 135708 (2018)
tekst: https://doi.org/10.1088/1361-6528/aaaaee

Nucleobases functionalized quantum dots and gold nanoparticles bioconjugates as a Fluorescence Resonance Energy Transfer (FRET) system – synthesis, characterization and potential applications

Ł. Rodzik-Czałka, J. Lewandowska-Łańcucka, V. Gatta, I. Venditti, I. Fratoddi, M. Szuwarzyński, M. Romek, M. Nowakowska
Journal of Colloid and Interface Science 514, 479-490 (2018)
tekst: https://doi.org/10.1016/j.jcis.2017.12.060

Molecular engineering of logic gate types by module rearrangement in ‘Pourbaix Sensors’: the effect of excited-state electric fields

J. C. Spiteri, S. A. Denisov, G. Jonusauskas, S. Klejna, K. Szaciłowski, N. D. McClenaghan and D. C. Magri
Organic Biomolecular Chemistry 16, 6195 (2018)
tekst: https://doi.org/10.1039/c8ob00485d

Mössbauer-effect study of dynamic, magnetic, and electronic properties of C14 Laves phase Nb0.975 Fe2.025

Jan Żukrowski and Stanisław M. Dubiel
Journal od Applied Physics, 123 (2018) 223902
tekst: https://doi.org/10.1063/1.5023342

Mössbauer studies of β→α phase transition in Sn-rich solder alloys

Piotr Zachariasz, Agata Skwarek, Balázs Illés, Jan Żukrowski, Tamás Hurtony, Krzysztof Witek
Microelectronics Reliability 82, 165-170 (2018)
tekst: https://doi.org/10.1016/j.microrel.2018.01.016

Microstructure, Hardness and Wear Resistance of Local TiC-ZrO2/FeCr Reinforcement Fabricated in Situ in Steel Castings

S. Sobula, E. Olejnik, P. Kurtyka, Ł. Szymański, T. Tokarski
Archives of Metallurgy and Materials 63 (1) , 119-124 (2018)
tekst: https://doi.org/10.24425/118917

Study of Investment Casting Technology from Bronze Age. Casting Workshop in Grzybiany (Southwest Poland)

A. Garbacz-Klempka, J.S. Suchy, Z. Kwak, T. Tokarski, R. Klempka, T. Stolarczyk
Archives of Metallurgy and Materials 63 (2), 615-624 (2018)
tekst: https://doi.org/10.24425/122385

TiC – based local composite reinforcement obtained in situ in ductile iron based castings with use of rode preform

E. Olejnik, Ł. Szymański, T. Tokarski, M. Tumidajewicz
Materials Letters 222, 192–195 (2018)
tekst: https://doi.org/10.1016/j.matlet.2018.03.159

Thermal range of cementite occurrence in hypereutectoid alloys with controlled C, Cr and Mn content

Ł. Frocisz, J. Krawczyk, T. Kozieł, K. Górecki, T. Tokarski, M. Kopyściański, P. Matusiewicz
Inżynieria Materiałowa 39 (1), 29–33 (2018)
tekst: https://doi.org/10.15199/28.2018.1.5

Superelastic behavior of a metamagnetic Ni−Mn−Sn single crystal

P. Czaja, R. Chulist, T. Tokarski, T. Czeppe, Y. I. Chumlyakov, E. Cesari
Journal of Materials Science 53 (14), 10383–10395 (2018)
tekst: https://doi.org/10.1007/s10853-018-2289-1

Reactive casting coatings for obtaining in situ composite layers based on Fe alloys

Ł. Szymański, E. Olejnik, T. Tokarski, P. Kurtyka, D. Drożyński, S. Żymanowska-Kumon
Surface and Coatings Technology 350, 346–358 (2018)
tekst: https://doi.org/10.1016/j.surfcoat.2018.06.085

Novel and effective synthesis protocol of AgNPs functionalized using L-cysteine as a potential drug carrier

M. Wojnicki, M. Luty-Błocho, M. Kotańska, M. Wytrwał, T. Tokarski, A. Krupa, M. Kołaczkowski, A. Bucki, M. Kobielusz
Naunyn-Schmiedebergs Archives of Pharmacology 391 (2), 123–130 (2018)
tekst: https://doi.org/10.1007/s00210-017-1440-x

Electrochemical deposition and characterization of AgPd alloy layers

N. R. Elezović, P. Żabiński, M. N. Krstajić-Pajić, T. Tokarski, B. M. Jović, V. D. Jović
Journal of the Serbian Chemical Society 83 (5), 593–609 (2018)
tekst: https://doi.org/10.2298/JSC171103011E

Effect of high strain rate beta processing on microstructure and mechanical properties of near-β titanium alloy Ti-10V-2Fe-3Al

P. Skubisz, Ł. Lisiecki, M. Paćko, T. Skowronek, P. Micek, T. Tokarski
Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials: Design and Applications, 232 (3), 181–190 (2018)
tekst: https://doi.org/10.1177/1464420715619447

Structure and Magnetism of LSMO/BTO/MgO/LSMO Multilayers

J. Pawlak, A. Żywczak, G. Szwachta, J. Kanak, M. Gajewska and M. Przybylski
Acta Phys. Polon. A 133, 548
tekst: https://doi.org/10.12693/APhysPolA.133.548

Magneto‐Structural Properties of Multielement Ni–Cu–Co–Mn–Sn Heusler Bulk Alloys

A. Wojcik, W. Maziarz, M. Szczerba, M. Sikora, A. Żywczak, L. Hawelek, E. Cesari
Physica Status Solidi A 1800358 (2018)
tekst: https://doi.org/10.1002/pssa.201800358

Ni-Cr-Ta-Al-C complex phase alloy – Design, microstructure and properties

Piotr Bala, Jerzy Morgiel, Grzegorz Cios, Krzysztof Wieczerzak, Tomasz Tokarski
Materials Science & Engineering A 711, 99–108 (2018)
tekst: https://doi.org/10.1016/j.msea.2017.11.026

Glass forming ability of the Zr50Cu40Al10 alloy with two oxygen levels

Krzysztof Pajor, Tomasz Kozieł, Grzegorz Cios, Piotr Błyskun, Piotr Bała, Anna Zielińska-Lipiec
Journal of Non-Crystalline Solids 496, 42 (2018)
tekst: https://doi.org/10.1016/j.jnoncrysol.2018.05.034

Deposition of Pd nanoparticles on the walls of cathodically hydrogenated TiO2 nanotube arrays via galvanic displacement: A novel route to produce exceptionally active and durable composite electrocatalysts for cost-effective hydrogen evolution

Uroš Lačnjevac, Rastko Vasilić, Tomasz Tokarski, Grzegorz Cios, Piotr Żabiński, Nevenka Elezović, Nedeljko Krstajić
Nano Energy  47, 527-538 (2018)
tekst: https://doi.org/10.1016/j.nanoen.2018.03.040

Engineering a Poly(3,4-ethylenedioxythiophene):(Polystyrene Sulfonate) Surface Using Self-Assembling Molecules - A Chemical Library Approach

P. Dąbczyński, M. M. Marzec, Ł. Pięta, K. Fijałkowski, J. Raczkowska, A. Bernasik, A. Budkowski and J. Rysz
ACS Omega 3, 3631 (2018)
tekst: https://doi.org/10.1021/acsomega.8b00029

Adaptability of single melanoma cells to surfaces with distinct hydrophobicity and roughness

S. Prauzner-Bechcicki, J. Raczkowska, J. Rysz, J. Wiltowska-Zubera, J. Pabijana, M. Marzec, A. Budkowski, M. Lekka
Applied Surface Science 457, 881–890 (2018)
tekst: https://doi.org/10.1016/j.apsusc.2018.06.251

Influence of Acrylic Polymers Stereoregularity on Interface Interactions in Model Thin Film Systems

M. M. Marzec, K. Awsiuk, P. Dabczynski, J. Rysz, A. Budkowski and A. Bernasik
Macromol. Chem. Phys. 219, 1800097 (2018)
tekst: https://doi.org/10.1002/macp.201800097

Carbon nanomaterials coatings – Properties and influence on nerve cells response

A. Fraczek-Szczypta, D. Jantas, F. Ciepiela, J. Grzonka, A. Bernasik, M. Marzec
Diamond & Related Materials 84, 127–140 (2018)
tekst: https://doi.org/10.1016/j.diamond.2018.03.017

Between single ion magnets and macromolecules: a polymer/transition metal-based semi-solid solution

A. M. Majcher, P. Dabczynski, M. M. Marzec, M. Ceglarska, J. Rysz, A. Bernasik, S. Ohkoshi and O. Stefanczyk
Chemical Science 9, 7277 (2018)
tekst: https://doi.org/10.1039/C8SC02277A

The applications of Cu substrate in liquid metal cooling systems

T. Gancarz, K. Berent
Materials Letters 227, 116  (2018)
tekst: https://www.sciencedirect.com/science/article/pii/S0167577X18308085

Soldering of Mg Joints Using Zn-Al Solders

T. Gancarz, K. Berent, W. Skuza, K. Janik
Metallurgical and Materials Transactions A 49, 2684 (2018)
tekst: https://link.springer.com/article/10.1007/s11661-018-4617-0

Microstructure, Texture and Mechanical Properties of Titanium Grade 2 Processed by ECAP (Route C)

M. Wroński, K. Wierzbanowski, D. Wojtas, E. Szyfner, R. Z. Valiev, J. Kawałko, K. Berent, K. Sztwiertnia
Metals and Materials International 24, 802 (2018)
tekst: https://link.springer.com/article/10.1007/s12540-018-0096-5

A three-dimensional heterogeneity analysis of electrochemical energy conversion in SOFC anodes using electron nanotomography and mathematical modeling

T. A. Prokop, K. Berent, H. Iwai, J. S. Szmyd, G. Brus
International Journal of Hydrogen Energy 23, 558 (2018)
tekst: https://doi.org/10.1016/j.ijhydene.2018.04.023

Interfacial reactions of Sn–Zn–Ag–Cu alloy on soldered Al/Cu and Al/Al joints

T. Gancarz, J. Pstrus, K. Berent
Science and Technology of Welding and Joining 23, 558 (2018)
tekst: https://doi.org/10.1080/13621718.2018.1427836

A multireflection and multiwavelength residual stress determination method using energy dispersive diffraction

M. Marciszko, A. Baczmański, M. Klaus, C. Genzel, A. Oponowicz, S. Wroński, M. Wróbel, C. Braham, H. Sidhom, R. Wawszczak
Journal of Applied Crystallography 51, 732–745 (2018)
tekst: https://doi.org/10.1107/S1600576718004193

Adhesive hybrid nanocomposites for potential applications in moulding sands technology

A. Kmita, D. Drożyński, A. Roczniak, M. Gajewska, M. Marciszko, K. Górecki, A. Baczmański
Composites. Part B, Engineering 146, 124–131 (2018)
tekst: https://doi.org/10.1016/j.compositesb.2018.03.046

Unconventional topological superconductivity and phase diagram for an effective two-orbital model as applied to twisted bilayer graphene

M. Fidrysiak, M. Zegrodnik, and J. Spałek
Phys. Rev. B 98, 085436 (2018)
tekst: https://doi.org/10.1103/PhysRevB.98.085436

Atomization of correlated molecular-hydrogen chain: A fully microscopic variational Monte Carlo solution

A. Biborski, A. P. Kądzielawa, and J. Spałek
Phys. Rev. B 98, 085112 (2018)
tekst: https://doi.org/10.1103/PhysRevB.98.085112

Corrosion studies of Li, Na and Si doped Zn-Al alloy immersed in NaCl solutions

T. Gancarza, K. Mech, J. Guśpiel, and K. Berent
Journal of Alloys and Compounds 767, 1225-1237 (2018)
tekst: https://doi.org/10.1016/j.jallcom.2018.07.109

Tuning of the Seebeck Coefficient and the Electrical and Thermal Conductivity of Hybrid Materials Based on Polypyrrole and Bismuth Nanowires

K. E. Hnida, K. Pilarczyk, M. Knutelski, M. Marzec, M. Gajewska, A. Kosonowski, D. Chlebda, B. Lis, and M. Przybylski
ChemPhysChem 19, 1617–162 (2018)
tekst: https://doi.org/10.1002/cphc.201800127

Sn-BEA zeolites prepared by two-step postsynthesis method: Physicochemical properties and catalytic activity in processes based on MPV reduction

N. O. Popovych, P. I. Kyriienko, Y. Milott., L. Valentin, J. Gurgul, R. P. Sochac, J. Żukrowski, S. O. Solovieva, S. Dzwigaj
Microporous and Mesoporous Materials 268, 178–188, (2018)
tekst: https://doi.org/10.1016/j.micromeso.2018.04.026

Mössbauer study of Eu0.57Ca0.43Fe2As2 and Eu0.73Ca0.27(Fe0.87Co0.13)2As2: A comparison to ‘122’ iron-based superconductors parent compounds EuFe2As2 and CaFe2As2

K. Komendera, A. Błachowski, K. Ruebenbauer, J. Żukrowski, S.M. Dubiel, L. M. Tran, M. Babij, Z. Bukowski
Journal of Magnetism and Magnetic Materials 457, 1–7 (2018)
tekst: https://doi.org/10.1016/j.jmmm.2018.02.079

Effect of 0.25 and 2.0 MeV He-Ion Irradiation on Short-Range Ordering in Model (EFDA) Fe-Cr Alloys

S. M. Dubiel, J. Żukrowski, and Y. Serruys
Metallurgical and Materials Transactions A 49A, 3729-3737 (2018)
tekst: https://doi.org/10.1007/s11661-018-4656-6

High Bragg reflectivity of diamond crystals exposed to multi-kW mm2 X-ray beams

Kolodziej Tomasz, Shvydko Yuri, Shu Deming, Kearney Steven, Stoupin Stanislav, Liu Wenjun, Gog Thomas, Walko Donald A., Wang Jin, Said Ayman, Roberts Tim, Goetze Kurt, Baldini Maria, Yang Wenge, Fister Timothy, Blank Vladimir, Terentyev Sergey, and Kim Kwang-Je
Journal of Synchrotron Radiation 25, 1022-1029 (2018)
tekst: https://doi.org/10.1107/S1600577518007695

Durability of the superconducting gap in Majorana nanowires under orbital effects of a magnetic field

P. Wójcik and M. P. Nowak
Phys. Rev. B 97, 235445 (2018)
tekst: https://doi.org/10.1103/PhysRevB.97.235445

Stability of the coexistent superconducting-nematic phase under the presence of intersite interactions

M. Zegrodnik, J. Spałek
New J. Phys. 20, 063015 (2018)
tekst: https://doi.org/10.1088/1367-2630/aac6f7

Superconducting phase transitions in mK temperature range in splat-cooled U0.85Pt0.15 alloys

N.-T.H. Kim-Ngan, Z. Tarnawski, M. Chrobak, S. Sowa, A. Duda, M. Paukov, V. Buturlim, L. Havela
Physica B: Condensed Matter 536, 516-518 (2018)
tekst: https://doi.org/10.1016/j.physb.2017.09.032

Superconductivity in single crystalline ThBe13 and LuBe13

K.Uhlířová, N. Miura, V. Tkáč, J. Prokleška, M. Chrobak, Z. Tarnawski, H. Hidaka, T. Yanagisawa, V. Sechovský, H. Amitsuka
Physica B: Condensed Matter 536, 516-518 (2018)
tekst: https://doi.org/10.1016/j.physb.2017.10.129

Superconductivity in U–Pt system with low Pt concentrations (≤15 at.%)

N.-T.H. Kim-Ngan, L. Havela, M. Paukov, D. Drozdenko, P. Minarik, M. Chrobak, Z. Tarnawski, S. Sowa, M. Krupska, A. Duda
Physica C: Superconductivity and its Applications 546, 76-83 (2018)
tekst: https://doi.org/10.1016/j.physc.2018.01.005

Valley dependent anisotropic spin splitting in silicon quantum dots

R. Ferdous, E. Kawakami, P. Scarlino, M. P. Nowak, D. R. Ward, D. E. Savage, M. G. Lagally, S. N. Coppersmith, M. Friesen, M. A. Eriksson, L. M. K. Vandersypen and R. Rahman
npj Quantum Information 4, 26 (2018)
tekst: https://doi.org/10.1038/s41534-018-0075-1

Determination of oxygen vacancy limit in Mn substituted yttria stabilized zirconia

Joanna Stępień, Marcin Sikora, Czesław Kapusta, Daria Pomykalska, and Mirosław M. Bućko
Journal of Applied Physics 123, 185108 (2018)
tekst: https://doi.org/10.1063/1.5019984

Interplay of local structure, charge, and spin in bilayered manganese perovskites

Damian Rybicki, Marcin Sikora, Janusz Przewoznik, Czesław Kapusta, and John F. Mitchell
Physical Review B 97, 115158 (2018)
tekst: https://doi.org/10.1103/PhysRevB.97.115158

Development of Ferrite-Based Temperature Sensors for Magnetic Resonance Imaging: A Study of Cu1−xZnxFe2O4

N. A. Alghamdi, J. H. Hankiewicz, N. R. Anderson, K. F. Stupic, R. E. Camley, M. Przybylski, J. Żukrowski, and Z. Celinski
Physical Review Applied 9, 054030 (2018)
tekst: https://doi.org/10.1103/PhysRevApplied.9.054030

Studies of “sluggish diffusion” effect in Co-Cr-Fe-Mn-Ni, Co-Cr-Fe-Ni and Co-Fe-Mn-Ni high entropy alloys; determination of tracer diffusivities by combinatorial approachS

W. Kucza, J. Dąbrowa, G. Cieślak, K. Berent, T. Kulik, M. Danielewski
Journal of Alloys and Compounds 731, 920-928 (2018)
tekst: https://doi.org/10.1016/j.jallcom.2017.10.108

The influence of high temperature annealing and creep on the microstructure and chemical element distribution in the γ, γ′ and TCP phases in single crystal Ni-base superalloy

B. Dubiel, P. Indyka, I. Kalemba-Rec, A. Kruk, T. Moskalewicz, A. Radziszewska, S. Kąc, A. Kopia, K. Berent, M. Gajewska
Journal of Alloys and Compounds 731, 693-703 (2018)
tekst: https://doi.org/10.1016/j.jallcom.2017.10.076

Research of Emission of Commercial Binders Used in ALPHASET Technology - Estimated Quantitative Analysis

A. Roczniak, M. Holtzer, A. Kmita
Archives of Foundry Engineering 18, 109 (2018)
tekst: link

Molecules, semiconductors, light and information: Towards future sensing and computing paradigms

Kacper Pilarczyk, Ewelina Wlaźlak, Dawid Przyczyna, Andrzej Blachecki, Agnieszka Podborska, Vasileios Anathasiou, Zoran Konkoli, Konrad Szaciłowski
Coordination Chemistry Reviews 365, 23-40 (2018)
tekst: https://doi.org/10.1016/j.ccr.2018.03.018

Pyrolysis of organic ester cured alkaline phenolic resin: Identification of products

A. Kmita, A. Benko, A. Roczniak, A. Frączek-Szczypta, M. Holtzer
Journal of Analytical and Applied Pyrolysis 129, 6-12 (2018)
tekst: https://doi.org/10.1016/j.jaap.2017.12.014

Thermal decomposition of foundry resins: A determination of organic products by thermogravimetry–gas chromatography–mass spectrometry (TG–GC–MS)

A.Kmita, C.Fischer, K.Hodor, M.Holtzer, A.Roczniak
Arabian Journal of Chemistry 11, 380-387 (2018)
tekst: https://doi.org/10.1016/j.arabjc.2016.11.003

Palladium(II) Chloride Complex Ion Recovery from Aqueous Solutions Using Adsorption on Activated Carbon

Marek Wojnicki, Robert P. Socha, Zbigniew Pędzich, Krzysztof Mech, Tomasz Tokarski, and Krzysztof Fitzner
J. Chem. Eng. Data 63 (3), 702–711 (2018)
tekst:https://doi.org/10.1021/acs.jced.7b00885

Renormalization of the Majorana bound state decay length in a perpendicular magnetic field

M. P. Nowak, P. Wójcik
Phys. Rev. B 97, 045419 (2018)
tekst:https://doi.org/10.1103/PhysRevB.97.045419

Comparative study of post-growth annealing of Cu(hfac)2,Co2(CO)8 and Me2Au(acac) metal precursors deposited by FEBID2

M. V. Puydinger dos Santos, A. Szkudlarek, A. Rydosz,Carlos Guerra-Nuñez, F. Béron, K. R. Pirota, S. Moshkalev, J. Alexandre Diniz, and I. Utke
Beilstein Journal of Nanotechnology 9, 91–101 (2018)
tekst:https://doi.org/10.3762/bjnano.9.11

1s2p Resonant Inelastic X-ray Scattering Magnetic Circular Dichroism as a probe for the local and non-local orbitals in CrO2

P. Zimmermann, N. Bouldi, M.O.J.Y. Hunault, M. Sikora, J.M. Ablett, J.-P. Rueff, B. Lebert, P. Sainctavit, F.M.F. de Groot, and A. Juhin
Journal of Electron Spectroscopy and Related Phenomena 222, 74 (2018)
tekst:https://doi.org/10.1016/j.elspec.2017.08.004

Phase composition of AlxFeNiCrCo high entropy alloys prepared by sintering and arc-melting methods

J. Cieslak, J. Tobola, K. Berent, M. Marciszko
Journal of Alloys and Compounds 740, pp 264-272 (2018)
tekst: https://doi.org/10.1016/j.jallcom.2017.12.333

Spectroelectrochemical analysis of TiO2 electronic states – Implications for the photocatalytic activity of anatase and rutile

Marcin Kobielusz, Kacper Pilarczyk, Elżbieta Świętek, Konrad Szaciłowski, Wojciech Macyk
Catalysis Today 309, 35-42 (2018)
tekst: https://doi.org/10.1016/j.cattod.2017.11.013

Strain-induced martensite reversion in 18Cr–8Ni steel – transmission Kikuchi diffraction study

G. Cios, T. Tokarski, P. Bała
Materials Science and Technology 34, 580–583 (2018)
tekst: https://doi.org/10.1080/02670836.2017.1376456