Publications

Publications 2020Publications 2019 Publications 2018 Publications 2017 Publications 2016 Publications 2015 Publications 2014 Publications 2013

Orthogonal shear process in Ni-Mn-Sn single crystal

R. Chulist, P. Czaja, T. Tokarski, I. Kuksgauzen, YI. Chumlyakov
International Journal of Plasticity 114, 63-71 (2019)
tekst: https://doi.org/10.1016/j.ijplas.2018.10.009

High-spatial resolution dating of monazite and zircon reveals the timing of subduction–exhumation of the Vaimok Lens in the Seve Nappe Complex (Scandinavian Caledonides)

C. Barnes, J.Majka, D. Schneider, K. Walczak, M. Bukała, K. Kośmińska, T. Tokarski, A. Karlsson
Contributions to Mineralogy and Petrology 174, 5 (2019)
tekst: https://doi.org/10.1007/s00410-018-1539-1

Structure of Pd-Zr and Pt-Zr modified aluminide coatings deposited by a CVD method on nickel superalloys

M. Pytel, T. Tokarski, M. Góral, R. Filip
Kovove Materialy 57, 343–354 (2019)
tekst: https://doi.org/10.4149/km_2019_5_343

Branching of {110) twin boundaries in five-layered Ni-Mn-Ga bent single crystals

R.Chulist, L.Straka, H.Seiner, A.Sozinov, N.Schell, T.Tokarski
Materials & Design 171, 107703 (2019)
tekst: https://doi.org/10.1016/j.matdes.2019.107703

Continuous, monodisperse silver nanoparticles synthesis using microdroplets as a reactor

M. Wojnicki, T. Tokarski, V. Hessel, K. Fitzner, M. Luty-Błocho
Journal of Flow Chemistry 9, 1–7 (2019)
tekst: https://doi.org/10.1007/s41981-018-0025-2

Comparative studies on the structure and properties of rapidly solidified and conventionally cast AM60 magnesium alloys

A. Kula, T. Tokarski, M. Niewczas
Materials Science and Engineering: A 759, 346-356 (2019)
tekst: https://doi.org/10.1016/j.msea.2019.05.044

Local composite reinforcements of TiC/FeMn type obtained in situ in steel castings

E. Olejnik, Ł. Szymański, T. Tokarski, B.  Opitek, P. Kurtyka
Archives of Civil and Mechanical Engineering 19, 997-1005, (2019)
tekst: https://doi.org/10.1016/j.acme.2019.05.004

Temperature dependence of twinning stress in Ni49.5Mn38.4Sn12.2 single crystal

P. Czaja, R. Chulist, K. Nalepka, T. Tokarski, Y. I. Chumlyakov, W. Maziarz
Journal of Applied Physics 126, 145107 (2019)
tekst: https://doi.org/10.1063/1.5097372

Interface engineering towards enhanced exchange interaction between Fe and FeO in Fe/MgO/FeO epitaxial heterostructures

A. Kozioł-Rachwał, W. Janus, M. Szpytma, P. Dróżdż, M. Ślęzak, K. Matlak, M. Gajewska, T. Ślęzak, J. Korecki
Appl. Phys. Lett. 115, 141603 (2019)
tekst: https://doi.org/10.1063/1.5112093

Hardware Realization of the Pattern Recognition with an Artificial Neuromorphic Device Exhibiting a Short-Term Memory

D. Przyczyna, M. Lis, K. Pilarczyk, K. Szaciłowski
Molecules 24, 2738 (2019)
tekst: https://doi.org/10.3390/molecules24152738

Reactive and morphological trends on porous anodic TiO2 substrates obtained at different annealing temperatures

K. Syrek, A. Sennik-Kubiec, J. Rodríguez-López, M. Rutkowska, P. Żmudzki, K. E. Hnida-Gut, J. Grudzień, L. Chmielarz, G. D.Sulka
International Journal of Hydrogen Energy (published online)
tekst: https://doi.org/10.1209/0295-5075/127/26002

Debye temperature of single-crystal Cr with incommensurate and commensurate magnetic structure

S. M. Dubiel, J. Żukrowski
EPL 127, 26002 (2019)
tekst: https://doi.org/10.1209/0295-5075/127/26002

Site-resolved hyperfine and lattice dynamical properties of a single-crystal Fe3Si

S.M. Dubiel, J. Żukrowski
Journal of Alloys and Compounds (published online)
tekst: https://doi.org/10.1016/j.jallcom.2019.152756

Kinetics of phase separation, border of miscibility gap in Fe–Cr and limit of Cr solubility in iron at 832 K

S. M. Dubiel, J. Żukrowski
Materials Characterization 158, 109937 (2019)
tekst: https://doi.org/10.1016/j.matchar.2019.109937

Fluorimetric naphthalimide-based polymer logic beads responsive to acidity and oxidisability

M. V. Refalo, N. V. Farrugia, A. D. Johnson, S. Klejna, K. Szaciłowski, D. C. Magri
Journal of Materials Chemistry C 7, 15225 (2019)
tekst: https://doi.org/10.1039/c9tc05545b

Effective oxygen reduction on A-site substituted LaCuO3-δ: Toward air electrodes for SOFCs based on perovskite-type copper oxides

A. Niemczyk, Z. Du, A. Olszewska, M. Marzec, M. Gajewska, K. Świerczek, H. Zhao, B. Poudelf, B. Dabrowski
Journal of Materials Chemistry A, 7, 27403 (2019)
tekst: https://doi.org/10.1039/C9TA09244G

Multi-phase nature of sintered vs. arc-melted CrxAlFeCoNi high entropy alloys-experimental and theoretical study

J. Cieslak, J. Tobola, J. Przewoznik, K. Berent, U. Dahlborg, J. Cornide, S. Mehraban, N. Lavery, M. Calvo-Dahlborg
Journal of Alloys and Compounds 801, 511-519 (2019)
tekst: https://doi.org/10.1016/j.jallcom.2019.06.121

The Effect of Calcination Temperature on the Structure and Performance of Nanocrystalline Mayenite Powders

K. Berent, S. Komarek, R. Lach, W. Pyda
Materials, 12, 3476 (2019)
tekst: https://doi.org/10.3390/ma12213476

Nanohydrogels Based on Self-Assembly of Cationic Pullulan and Anionic Dextran Derivatives for Efficient Delivery of Piroxicam

D. Lachowicz, P. Mielczarek, R. Wirecka, K. Berent, A. Karewicz, M. Szuwarzyński, S. Zapotoczny
Pharmaceutics 11(12), 622 (2019)
tekst: https://doi.org/10.3390/pharmaceutics11120622

Structural, magnetic and toxicity studies of ferrite particles employed as contrast agents for magnetic resonance imaging thermometry

N. Alghamdia, J. Strouda, M. Przybylski, J. Żukrowski, A. Cruz, H. Jared, M.Brown, J. H.Hankiewicz, Z. Celinski
Journal of Magnetism and Magnetic Materials (published online)
tekst: https://doi.org/10.1016/j.jmmm.2019.165981

Characterization of MgO/TiN bilayer deposited on cube-textured copper using pulsed-laser deposition technique

G. Szwachta, M. Gajewska, P. Dłużewski, S. Kąc, M. Przybylski
Thin Solid Films 692, 137621 (2019)
tekst: https://doi.org/10.1016/j.tsf.2019.137621

Magnetic Contrast at Spin-Flip Excitations: An Advanced X-Ray Spectroscopy Tool to Study Magnetic-Ordering

H. Elnaggar, R.-P. Wang, S. Lafuerza, E. Paris, Y. Tseng, D. McNally, A. Komarek, M. Haverkort, M. Sikora, T. Schmitt, and F.M.F. de Groot
ACS Appl. Mater. Interfaces 11, 36213 (2019)
tekst: https://doi.org/10.1021/acsami.9b10196

Noncollinear Ordering of the Orbital Magnetic Moments in Magnetite

H. Elnaggar, Ph. Sainctavit, A. Juhin, S. Lafuerza, F. Wilhelm, A. Rogalev, M.-A. Arrio, Ch. Brouder, M. van der Linden, Z. Kakol, M. Sikora, M.W. Haverkort, P. Glatzel, and F.M.F. de Groot
Phys. Rev. Lett. 123, 207201 (2019)
tekst: https://doi.org/10.1103/PhysRevLett.123.207201

Silver Nanoparticle-Based Assay for the Detection of Immunoglobulin Free Light Chains

Anna Lizoń, M. Wytrwal-Sarna, M. Gajewska, R. Drożdż
Materials 12, 2981 (2019)
tekst: https://doi.org/10.3390/ma12182981

Formation of Strong Polycation (Poly[(3-allylamino-2-hydroxypropyl)trimethylammonium chloride]) Monolayers on Mica, Silica, and Gold Substrates: Modeling and Experimental Studies

A. Michna, P. Batys, M. Morga, A. Pomorska, M. Wytrwal-Sarna, M. Kepczynski, Z. Adamczyk
J. Phys. Chem. C 123, 19022−19032 (2019)
tekst: https://doi.org/10.1021/acs.jpcc.9b04533

Multireflection grazing-incidence X-ray diffraction: a new approach to experimental data analysis

M. Marciszko-Wiąckowska, A. Oponowicz, A. Baczmanski, M. Wróbel, Ch. Braham, R. Wawszczak
J. Appl. Cryst. 52, 1409–1421 (2019)
tekst: https://doi.org/10.1107/S1600576719013876

Evaluation of pyrolysis and combustion products from foundry binders: potential hazards in metal casting

A. Kmita, A. Benko, A. Roczniak, M. Holtzer
Journal of Thermal Analysis and Calorimetry (published online)
tekst: https://doi.org/10.1007/s10973-019-09031-9

Structural and electronic properties of multifunctional carbon composites of organometal halide perovskite

Sylwia Klejna
J. Mater. Chem. A 7, 25020-25031 (2019)
tekst: https://doi.org/10.1039/C9TA06517B

Reservoir Computing for Sensing – an Experimental Approach

D. Przyczyna, S. Pecqueur, D. Vuillaume, K. Szaciłowski
Int. Journ. of Unconventional Computing 14, 267–284 (2019)

Topography and residual stress analysis for Cu/Au/Co multilayered system

M. Marciszko-Wiąckowska, K. E. Hnida-Gut, A. Baczmański, M. Wróbel
Surface & Coatings Technology 380, 125060 (2019)
tekst: https://doi.org/10.1016/j.surfcoat.2019.125060

Roughness and Fiber Fraction Dominated Wetting of Electrospun Fiber-Based Porous Meshes

P. K. Szewczyk, D. P. Ura, S. Metwally, J. Knapczyk-Korczak, M. Gajek, M. M. Marzec, A. Bernasik, U. Stachewicz
Polymers 11, 34 (2019)
tekst: https://doi.org/10.3390/polym11010034

Mn-rich SmBaCo0.5Mn1.5O5-d double perovskite cathode material for SOFCs

A. Olszewska, Y. Zhang, Z. Du, M. Marzec, K. Swierczek, H. Zhao, B. Dabrowski
International Journal of Hydrogen Energy 44, 27587-27599 (2019)
tekst: https://doi.org/10.1016/j.ijhydene.2019.08.254

Elucidation of Unexpectedly Weak Catalytic Effect of Doping with Cobalt of the Cryptomelane and Birnessite Systems Active in Soot Combustion

P. Legutko, J. Pęza, A. V. Rossi, M. Marzec, T. Jakubek, M. Kozieł, A. Adamski
Topics in Catalysis 62, 599–610 (2019)
tekst: https://doi.org/10.1007/s11244-019-01132-x

Room-Temperature Ferromagnetism in InSb-Mn Nanowires

K. E. Hnida, A. Żywczak, M. Sikora, M. Marciszko, M. Przybylski
Nano Lett. 19, 7144-7148 (2019)
tekst: https://doi.org/10.1021/acs.nanolett.9b02690

Gradient of zinc content in the core-shell zinc ferrites nanoparticles - precise study on composition and magnetic properties

D. Lachowicz, R. Wirecka, W. Górka-Kumik, M. Marzec, M. Gajewska, A. Kmita, J. Żukrowski, M. Sikora, S. Zapotoczny, A. Bernasik
Phys. Chem. Chem. Phys. 21, 23473-23484 (2019)
tekst: https://doi.org/10.1039/C9CP03591E

Improving the performance of sulphur doped LiMn2O4 by carbon coating

K. Chudzik, M. Lis, M. Świętosławski, M. Bakierska, M. Gajewska, M. Molenda
Journal of Power Sources 434, 226725 (2019)
tekst: https://doi.org/10.1016/j.jpowsour.2019.226725

Misorientation characteristics of interphase boundaries in Pinctada margaritifera shell

M. Strąg, M. Bieda, Ł. Maj, A. Jarzębska, K. Berent, K. Nalepka, A. G. Checa, K. Sztwiertnia
Materials Letters 253, 302-305 (2019)
tekst: https://doi.org/10.1016/j.matlet.2019.06.099

The properties of particulate matter generated during wood combustion in in-use stoves

K. Szramowiat-Sala, A. Korzeniewska, K. Sornek, M. Marczak, F. Wierońska, K. Berent, J. Gołaś, M. Filipowicz
Fuel 253,792-801 (2019)
tekst: https://doi.org/10.1016/j.fuel.2019.05.026

Interfacial Phenomena between Liquid Ga-Based Alloys and Ni Substrate

T. Gancarz, K. Berent, N. Schell, R. Chulist
Journal of Electronic Materials 48, 5941-5947 (2019)
tekst: https://doi.org/10.1007/s11664-019-07356-7

Oxidation behaviour of thin Ni/Al2O3 nanocomposite coatings electrodeposited on steel substrate

A. Góral, T. Czeppe, K. Berent
Surface and Coatings Technology 369, 95-104 (2019)
tekst: https://doi.org/10.1016/j.surfcoat.2019.04.054

Demystifying the sluggish diffusion effect in high entropy alloys

J. Dąbrowa, M. Zajusz, W. Kucza, G. Cieślak, K. Berent, T. Czeppe, T. Kulik, M. Danielewski
Journal of Alloys and Compounds 783, 193-207 (2019)
tekst: https://doi.org/10.1016/j.jallcom.2018.12.300

A multiscale approach to the numerical simulation of the solid oxide fuel cell

M. Moździerz, K. Berent, S. Kimijima, J. S. Szmyd, G. Brus
Catalysts 9, 253 (2019)
tekst: https://doi.org/10.3390/catal9030253

Guar Gum as an Eco-Friendly Corrosion Inhibitor for Pure Aluminium in 1-M HCl Solution

G. Palumbo, K. Berent, E. Proniewicz, J. Banaś
Materials 12, 2620 (2019)
tekst: https://doi.org/10.3390/ma12162620

The effect of reduced temperatures on microstructure development in tensile tested high-manganese steel

J. Kowalska, J. Ryś, G. Cios, W. Bednarczyk
Materials Science and Engineering: A (in press)
tekst: https://doi.org/10.1016/j.msea.2019.138406

Considering influence of microstructure morphology of epoxy/glass composite on its behavior under deformation conditions—digital material representation case study

Madej L., Malinowski L., Perzynski K., Mojzeszko M., Wang J., Cios G., Czarnecki D., Bala P.
Archives of Civil and Mechanical Engineering, 19 1304-1315 (2019)
tekst: https://doi.org/10.1016/j.acme.2019.07.001

Determination of room-temperature superplastic asymmetry and anisotropy of Zn-0.8Ag alloy processed by ECAP

W. Bednarczyk, M. Wątroba, J. Kawałko, P. Bała
Materials Science and Engineering A 759, 55–58 (2019)
tekst: https://doi.org/10.1016/j.msea.2019.05.029

Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP

W. Bednarczyk, M. Wątroba, J. Kawałko, P. Bała
Materials Science and Engineering A 748, 357–366 (2019)
tekst: https://doi.org/10.1016/j.msea.2019.01.117

Cryogenic behaviour of the Al5Ti5Co35Ni35Fe20 multi-principal component alloy

K. Górecki, P. Bała, W. Bednarczyk, J. Kawałko
Materials Science and Engineering A, 745 346–352 (2019)
tekst: https://doi.org/10.1016/j.msea.2019.01.001

The effect of anodizing potential and annealing conditions on the morphology, composition and photoelectrochemical activity of porous anodic tin oxide films

L. Zaraska, K. Gawlak, E. Wiercigroch, K. Malek, M. Kozieł, M. Andrzejczuk, M. M. Marzec, M. Jarosz, A. Brzózka, G. D. Sulka
Electrochimica Acta 319, 18-30 (2019)
tekst: https://doi.org/10.1016/j.electacta.2019.06.113

Single-step approach to tailor surface chemistry and potential on electrospun PCL fibers for tissue engineering application

S. Metwally, J. E. Karbowniczek, P. K. Szewczyk, M. M. Marzec, A. Gruszczyński, A. Bernasik, U. Stachewicz
Advanced Materials Interfaces 6, 1–12 (2019)
tekst: https://doi.org/10.1002/admi.201801211

Surface-potential-controlled cell proliferation and collagen mineralization on electrospun polyvinylidene fluoride (PVDF) fiber scaffolds for bone regeneration

P. K. Szewczyk, S. Metwally, J. E. Karbowniczek, M. M. Marzec, E. Stodolak-Zych, A. Gruszczyński, A. Bernasik, U. Stachewicz
ACS Biomaterials Science & Engineering 5, 582–593 (2019)
tekst: https://doi.org/10.1021/acsbiomaterials.8b01108

Surface potential tailoring of PMMA fibers by electrospinning for enhanced triboelectric performance

T. Busolo, D. P. Ura, S. K. Kim, M. M. Marzec, A. Bernasik, U. Stachewicz, S. Kar-Narayan
Nano Energy 57, 500–506 (2019)
tekst: https://doi.org/10.1016/j.nanoen.2018.12.037

Analysis of toxicity and anticancer activity of micelles of sodium alginate-curcumin

Karabasz A, Lachowicz D, Karewicz A, Mezyk-Kopec R, Stalińska K, Werner E, Cierniak A, Dyduch G, Bereta J, Bzowska M
International Journal of Nanomedicine 14, 7249–7262 (2019)
tekst: https://doi.org/10.2147/IJN.S213942

The effect of strain path change on texture evolution and deformation behavior of Ti6Al4V subjected to accumulative angular drawing

J. Kawałko, K. Muszka, P. Graca, M. Kwiecień, M. Szymula, M. Marciszko, P.Bała, Ł. Madej, I. J. Beyerlein
Materials Science and Engineering: A 764, 138168 (2019)
tekst: https://doi.org/10.1016/j.msea.2019.138168

The decomposition process and kinetic analysis of commercial binder based on phenol-formaldehyde resin, using in metal casting

A. Kmita, W. Knauer, M. Holtzer, K. Hodor, G. Piwowarski, A. Roczniak, K. Górecki
Applied Thermal Engineering 156, 263-275 (2019)
tekst: https://doi.org/10.1016/j.applthermaleng.2019.03.093

Synthesis of CuFeS2−xSex – alloyed nanocrystals with localized surface plasmon resonance in the visible spectral range

P. Kowalik, P. Bujak, M. Penkala, K. Kotwica, A. Kmita, M. Gajewska, A. Ostrowski, A. Prona
Journal of Materials Chemistry C 7, 6246-6250 (2019)
tekst: https://doi.org/10.1039/C9TC01242G

Design of novel Zn-Ag-Zr alloy with enhanced strength as a potential biodegradable implant material

M. Wątroba, W. Bednarczyk, J. Kawałko, K. Mech, M. Marciszko, G. Boelter, M. Banzhaf, P. Bała
Materials & Design 183, 108154 (2019)
tekst: https://doi.org/10.1016/j.matdes.2019.108154

Microwave system with sensor utilizing GO-based gas-sensitive layer and its application to acetone detection

K. Staszek, A. Szkudlarek, M. Kawa, A. Rydosz
Sensors and Actuators 297, 126699 (2019)
tekst: https://doi.org/10.1016/j.snb.2019.126699

Peptides of human body fluids as sensors of corrosion of titanium to titanium dioxide : SERS application

A. Tąta, A. Szkudlarek, J. Pacek, M. Molenda, E. Proniewicz
Applications of Surface Science 473, 107–120 (2019)
tekst: https://doi.org/10.1016/j.apsusc.2018.12.158

One-Step Synthesis of Long Term Stable Superparamagnetic Colloid of Zinc Ferrite Nanorods in Water

A. Kmita, D. Lachowicz, J. Żukrowski, M. Gajewska, W. Szczerba, J. Kuciakowski, S. Zapotoczny, and M. Sikora
Materials 12, 1048 (2019)
tekst: https://doi.org/10.3390/ma12071048

Enhanced hyperthermic properties of biocompatible zinc ferrite nanoparticles with a charged polysaccharide coating

D. Lachowicz, W. Górka, A. Kmita, A. Bernasik, J. Żukrowski, W. Szczerba, M. Sikora, C. Kapusta, and S. Zapotoczny
Mater. Chem. B 7, 2962 (2019)
tekst: https://doi.org/10.1039/c9tb00029a

Electrodeposition of Composite Ni-TiO2 Coatings from Aqueous Acetate Baths

K. Mech
Metallurgical and Materials Transactions A 50, 4275–4287 (2019)
tekst: https://doi.org/10.1007/s11661-019-05325-7

Magnetic Phase Transition and Exchange Bias in Ni45Co5Mn35.5In14.5 Heusler Alloy

Ł. Dubiel, A. Żywczak, W. Maziarz, I. Stefaniuk, A. Wal
Applied Magnetic Resonance 50, 809 (2019)
tekst: https://doi.org/10.1007/s00723-018-1085-z

The influence of strain on the Verwey transition as a function of dopant concentration: towards a geobarometer for magnetite-bearing rocks

I. Biało, A. Kozłowski, M. Wack, A. Włodek, Ł. Gondek, Z. Kąkol, R. Hochleitner, A. Żywczak, V. Chlan, S. A. Gilder
Geophysical Journal International 219, 148–158 (2019)
tekst: https://doi.org/10.1093/gji/ggz274

Magnetic and structural phase transition in Ni50Mn35.5In14.5 ribbon

Ł. Dubiel, I. Stefaniuka, A. Wala, A. Żywczak, A. Dziedzica, W. Maziarz
Journal of Magnetism and Magnetic Materials 485, 21 (2019)
tekst: https://doi.org/10.1016/j.jmmm.2019.04.051

A novel magnetoelectrochemical method of synthesis of photoactive Ni-TiO2 coatings from glycinate electrolytes

K. Mech
Materials and Design 182, 108055 (2019)
tekst: https://doi.org/10.1016/j.matdes.2019.108055

Intersubband pairing induced Fulde-Ferrell phase in metallic nanofilms

P. Wójcik, M. P. Nowak, M. Zegrodnik
Phys. Rev. B 100, 045409 (2019)
tekst: https://doi.org/10.1103/PhysRevB.100.045409

The experimental and theoretical study on influence of Al and Cu contents on phase abundance changes in AlxCuyFeCrNiCo HEA system

K. Matusiak, K. Berent, M. Marciszko, J. Cieślak
Journal of Alloys and Compounds 790, 837–846 (2019)
tekst: https://doi.org/10.1016/j.jallcom.2019.03.162

A numerical analysis of unsteady transport phenomena in a Direct Internal Reforming Solid Oxide Fuel Cell

M. Chalusiak, M. Wrobel, M. Mozdzierz, K. Berent, J. S. Szmyd, S. Kimijima, G. Brus
International Journal of Heat and Mass Transfer 131, 1032-1051 (2019)
tekst: https://www.sciencedirect.com/science/article/pii/S0017931018339310

Microstructure and mechanical properties of Mg–Zn–RE–Zr alloy after thixoforming

Ł. Rogal, A. Kania, K. Berent, K. Janus, L. Lityńska-Dobrzyńska
Journal of Materials Research and Technology, 8, 1121-1131 (2019)
tekst: https://www.sciencedirect.com/science/article/pii/S2238785418303624

SHS reaction of Ti/Al multilayers and resistive heating used for joining of Ti-6Al-4V alloy

Ł. Maj, J. Morgiel, K. Mars, G. Cios, A. Tarasek, E. Godlewska
Materials Characterization 154, 31-39 (2019)
tekst: https://doi.org/10.1016/j.matchar.2019.05.040

Effect of strain rate and crystalline inclusions on mechanical properties of bulk glassy and partially crystallized Zr52.5Cu17.9Ni14.6Al10Ti5 alloy

T. Kozieł, K. Pajor, G. Cios, P. Bała
Transactions of Nonferrous Metals Society of China 29, 1036-1045 (2019)
tekst: https://doi.org/10.1016/S1003-6326(19)65012-0

Thermal oxygen activation followed by in situ work function measurements over carbon-supported noble metal-based catalysts

J. Duch, P. Stelmachowski, A. Videla, M. Gajewska, A. Kotarba, S. Specchia
International Journal of Hydrogen Energy, in press
tekst: https://doi.org/10.1016/j.ijhydene.2019.04.130

Aqueous Binder for Nanostructured Carbon Anode Materials for Li-Ion Batteries

M. Lis, K. Chudzik, M. Bakierska, M. Świętosławski, M. Gajewska, M. Rutkowska, M. Molenda
Journal of The Electrochemical Society 166, A5354-A5361 (2019)
tekst: https://doi.org/10.3390/nano9020307

Polypyrrole–Nickel Hydroxide Hybrid Nanowires as Future Materials for Energy Storage

A. Brzózka, K. Fic, J. Bogusz, A. M. Brudzisz, M. M. Marzec, M. Gajewska, G. D. Sulka
Nanomaterials 9, 307 (2019)
tekst: https://doi.org/10.3390/nano9020307

Addition of carbon nanotubes to electrospun polyacrylonitrile as a way to obtain carbon nanofibers with desired properties

A. Benko, M. Nocuń, M. Gajewska, M. Błażewicz
Polymer Degradation and Stability 161, 260-276 (2019)
tekst: https://doi.org/10.1016/j.polymdegradstab.2019.01.033

Bio-derived carbon nanostructures for high-performance lithium-ion batteries

M. Bakierska, M. Lis, J. Pacek, M. Świętosławski, M. Gajewska, A. Tąta, E. Proniewicz, M. Molenda
Carbon 145, 426-432 (2019)
tekst: https://doi.org/10.1016/j.carbon.2019.01.051

Probing Andreev reflection reach in semiconductor-superconductor hybrids by Aharonov-Bohm effect

M. P. Nowak, P. Wojcik
Appl. Phys. Lett. 114, 043104 (2019)
tekst: ttps://doi.org/10.1063/1.5063975

Memristor in a Reservoir System - Experimental Evidence for High-Level Computing and Neuromorphic Behavior of PbI2

E. Wlaźlak, M. Marzec, P. Zawal, and K. Szaciłowski
ACS Appl. Mater. Interfaces 11, 17009−17018 (2019)
tekst: ttps://doi.org/10.1021/acsami.9b01841

Ions-free electrochemically synthetized in aqueous media flake-like CuO nanostructures as SERS reproducible substrates for the detection of neurotransmitters

E. Proniewicz, A. Tąta, M. Starowicz, A. Szkudlarek, J. Pacek, M. Molenda, P. Kuśtrowski
Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy 215, 24-33, (2019)
tekst: ttps://doi.org/10.1016/j.saa.2019.02.051

Fine-tuning of canted magnetization in stepped Fe films through thickness variation, Au capping, and quantum confinement

M. Dąbrowski, M. Cinal, A. K. Schmid, J. Kirschner, and M. Przybylski
Phys. Rev. B 99, 184420 (2019)
tekst: https://doi.org/10.1103/PhysRevB.99.184420

Magnetically Navigated Core–Shell Polymer Capsules as Nanoreactors Loadable at the Oil/Water Interface

J. Odrobińska, E. Gumieniczek-Chłopek, M. Szuwarzyński, A. Radziszewska, S. Fiejdasz, T. Strączek, C. Kapusta, S. Zapotoczny
ACS Appl. Mater. Interfaces 11, 10905 (2019)
tekst: https://doi.org/10.1021/acsami.8b22690

Homogeneous Embedding of Magnetic Nanoparticlesinto Polymer Brushes during SimultaneousSurface-Initiated Polymerization

W. Górka,T. Kuciel, P. Nalepa, D. Lachowicz, S. Zapotoczny, M. Szuwarzynski
Nanomaterials 9, 456 (2019)
tekst: https://doi.org/10.3390/nano9030456

Role of Austenitization Temperature on Structure Homogeneity and Transformation Kinetics in Austempered Ductile Iron

M. Górny, G. Angella, E. Tyrała, M. Kawalec, S. Paź, A. Kmita
Metals and Materials International (in press)
tekst: https://doi.org/10.1007/s12540-019-00245-y

Superconductivity in the three-band model of cuprates: Variational wave function study and relation to the single-band case

M. Zegrodnik, A. Biborski, M. Fidrysiak, and J. Spałek
Phys. Rev. B 99, 104511 (2019)
tekst: https://doi.org/10.1103/PhysRevB.99.104511

Influence of pulse frequency on physicochemical properties of InSb films obtained via electrodeposition

K. E. Hnida, M. Marzec, E. Wlaźlak, D. Chlebda, K. Szaciłowski, D. Gilek, G. D.Sulka, M. Przybylski
Electrochimica Acta, 304, 396-404 (2019)
tekst: https://doi.org/10.1016/j.electacta.2019.02.111

Electrochemical behavior of InSb thin films with different crystal structure in alkaline solution

D. Gilek, A. Brzózka, K. E. Hnida, G. D. Sulka
Electrochimica Acta 302, 352-362 (2019)
tekst: https://doi.org/10.1016/j.electacta.2019.02.050

Supramolecular Complexes of Graphene Oxide with Porphyrins: An Interplay between Electronic and Magnetic Properties

Kornelia Lewandowska, Natalia Rosiak, Andrzej Bogucki, Judyta Cielecka-Piontek, Mikołaj Mizera, Waldemar Bednarski, Maciej Suchecki, Konrad Szaciłowski
Molecules 24, 688 (2019)
tekst: https://doi.org/10.3390/molecules24040688

Supercurrent carried by non-equlibrium quasiparticles in a multiterminal Josephson junction

M. P. Nowak, M. Wimmer, A. R. Akhmerov
Phys. Rev. B 99 075416 (2019)
tekst: https://doi.org/10.1103/PhysRevB.99.075416

Highly Luminescent Ag–In–Zn–S Quaternary Nanocrystals: Growth Mechanism and Surface Chemistry Elucidation

P. Bujak, Z. Wróbel, M. Penkala, K. Kotwica, A. Kmita, M. Gajewska, A. Ostrowski, P. Kowalik, A. Pron
Inorg. Chem. 58, pp 1358–1370 (2019)
tekst: https://doi.org/10.1021/acs.inorgchem.8b02916

Dissolution of Ag Precipitates in the Cu–8wt.%Ag Alloy Deformed by High Pressure Torsion

A. Korneva, B. Straumal, A. Kilmametov, R. Chulist, G. Cios, B. Baretzky, P. Zięba
Materials 12, 447 (2019)
tekst: https://doi.org/10.3390/ma12030447

Blood-compatible, stable micelles of sodium alginate - curcumin bioconjugate for anti-cancer applications

D. Lachowicz, A. Karabasz, M. Bzowska, M. Szuwarzyński, A. Karewicz, M. Nowakowska
European Polymer Journal 113, 208 (2019)
tekst: https://doi.org/10.1016/j.eurpolymj.2019.01.058

Synaptic plasticity, metaplasticity and memory effects in hybrid organic–inorganic bismuth-based materials

Tomasz Mazur, Piotr Zawal, Konrad Szaciłowski
Nanoscale 11, 1080-1090 (2019)
tekst: https://doi.org/10.1039/c8nr09413f

Polymer brushes grafted from nanostructured zinc oxide layers – Spatially controlled decoration of nanorods

A. Pomorska, K. Wolski, M. Wytrwal-Sarna, A. Bernasik, S. Zapotoczny
European Polymer Journal 112, 186-194 (2019)
tekst: https://doi.org/10.1016/j.eurpolymj.2019.01.012

Enhancement of the growth of polymer brushes via ATRP initiated from ions-releasing indium tin oxide substrates

A. Gruszkiewicz, M. Słowikowska, G. Grześ, A. Wójcik, J. Rokita, A. Fiocco, M. Wytrwal-Sarna, M. Marzec, B. Trzebicka, M. Kopeć, K. Wolski, S. Zapotoczny
European Polymer Journal 112, 817-821 (2019)
tekst: https://doi.org/10.1016/j.eurpolymj.2018.11.004

Numerical modelling of a compression test based on the 3D digital material representation of pulsed laser deposition deposited TiN thin films

K. Perzynski, G. Cios G. Szwachta, D. Zych, M. Setty, P. Bała, L. Madej
Thin Solid Films, in press (2019)
tekst: https://doi.org/10.1016/j.tsf.2019.01.012

The Effect of Fe Addition on Fragmentation Phenomena, Macrostructure, Microstructure, and Hardness of TiC-Fe Local Reinforcements Fabricated In Situ in Steel Casting

E. Olejnik, T. Tokarski, G. Sikora, S. Sobula, W. Maziarz, Ł. Szymański, B Grabowska
Metallurgical and Materials Transactions A 50, 975–986 (2019)
tekst: https://doi.org/10.1007/s11661-018-4992-6

Development of Auto Ejection Melt Spinning (AEMS) and its application in fabrication of cobalt-based ribbons

A. A. Shirzadi, T. Kozieł, G. Cios, P. Bała
Journal of Materials Processing Technology 264, 377-381 (2019)
tekst: https://doi.org/10.1016/j.jmatprotec.2018.09.028

Ternary LaNi4.75M0.25 hydrogen storage alloys: Surface segregation, hydrogen sorption and thermodynamic stability

Z. Łodziana, A. Dębski, G. Cios, A. Budziak
International Journal of Hydrogen Energy 44, 1760-1773 (2019)
tekst: https://doi.org/10.1016/j.ijhydene.2018.11.104

Comparative study of Co-rich and Ce-rich oxide nanocatalysts (CoxCe1−xOy) for low-temperature total oxidation of methanol

R. Dziembaj, A. Chojnacka, Z. Piwowarska, M. Gajewska, M. Świętosławski, S. Górecka, M. Molenda
Catalysis Today 333, 196-207 (2019)
tekst: https://doi.org/10.1016/j.cattod.2018.03.042

  1. Robust Co3O4|α-Al2O3|cordierite structured catalyst for N2O abatement – Validation of the SCS method for active phase synthesis and deposition
  2. Halloysite-alkaline phosphatase system—A potential bioactive component of scaffold for bone tissue engineering
  3. Microstructural anisotropy, phase composition and magnetic properties of as-cast and annealed Ni-Mn-Ga-Co-Cu melt-spun ribbons